On2 VP6

From MultimediaWiki
(Redirected from VP62)
Jump to navigation Jump to search

Implementations

An early open source implementation could be found at http://libvp62.sourceforge.net/, but was driven underground by On2 on copyright infringement claims.

This specification is said to be incomplete with regard to the On2 VP6 specification.

A decoder implementation may be found in the FFMPEG source file vp6.c

Format

The aim here is to open this standard with a full description of the bitstream format and decoding process. Contributors from On2 especially encouraged here, but it is anticipated that this section will be completed through reverse engineering and by people who saw libvp62 source code before it was censored.

Please do not submit any copyrighted text or code here.

Introduction

VP6 uses unidirectional ("P-frame") and intra-frame (within the current frame) prediction. Entropy coding is performed using arithmetic (range?) coding and an 8x8 iDCT is used. The format supports dynamic adjustment of encoded video resolution. There are three variants of the VP6 codec, VP60 (Simple Profile), VP62 (Advanced Profile) and VP62 (Heightened Sharpness Profile).


Macroblocks

Each video frame is composed of an array of 16x16 macroblocks, just like MPEG-2, MPEG-4 parts 2 and 10. Each MB (macroblock) takes one of the following modes ("MV" means "motion vector"):

  • Intra MB
  • Inter MB, null MV, previous frame reference
  • Inter MB, differential MV, previous frame reference
  • Inter MB, four MVs, previous frame reference
  • Inter MB, MV 1, previous frame reference
  • Inter MB, MV 2, previous frame reference
  • Inter MB, null MV, bookmarked frame reference
  • Inter MB, differential MV, bookmarked frame reference
  • Inter MB, MV 1, bookmarked frame reference
  • Inter MB, MV 2, bookmarked frame reference

Frame Header

The frame header commences with a section that is encoded using conventional big-endian bit packing.

Syntax Number of bits Type Semantics
frame_mode 1 Enum 0x0 signifies an intra frame
qp 6 Unsigned Quantization parameter valid range 0..63
marker 1 Constant 0=VP61/62, 1=VP60
if (frame_mode == 0) { 0 equals to INTRA_FRAME
version 5 Constant 6=VP60/61, 7=VP60(Electronic Arts), 8=VP62
version2 2 Constant 0=VP60, 3=VP61/62
interlace 1 Boolean true (1) means interlace will be used
if (marker==1 or version2==0) {
offset 16 Unsigned secondary buffer offset (bytes releative to start of buffer)
}
dim_y 8 Unsigned Macroblock height of video
dim_x 8 Unsigned Macroblock width of video
render_y 8 Unsigned Display height of video
render_x 8 Unsigned Display width of video
}else{
if (marker==1 or version2==0) {
offset 16 Unsigned secondary buffer offset (bytes releative to start of buffer)
}
}

If dim_x or dim_y have values different from the previous intra frame, then the resolution of the encoded image has changed.

Arithmetic coding commences at the next bit (which should be on a byte boundary):

Syntax Type Semantics
if (frame_mode == 0) {
marker1 Equiprobable 2-bit Ignored
} else {
bookmark Equiprobable 1-bit bookmark == 0x1 means this frame will be the next bookmark frame
filter1 Equiprobable 1-bit
if (filter1 == 0x1) {
filter2 Equiprobable 1-bit
}
filter_info Equiprobable 1-bit
}
if (frame_mode == 0 || filter_info == 0x1) {
filter_mode1 Equiprobable 1-bit
if (filter_mode1 == 0x1) {
filter_threshold1 Equiprobable 5-bit
filter_motion_param Equiprobable 3-bit
} else {
filter_mode2 Equiprobable 1-bit
}
filter_mode3 Equiprobable 4-bit
}
marker2 Equiprobable 1-bit Secondary buffer encoding algorithm. 0=Range coding, 1=Huffman coding.

If the secondary buffer is present, coeffient symbols are read from the secondary buffer using the algorithm indicated by marker2. VP60 has "the ability to switch to a faster entropy encoding strategy to ensure smooth playback" and "the ability to decode different parts of the bitstream on different sub-processors (for instance the vlx and the core), to ensure better overall system utilization" [1].

Entropy Coding

Described here is the decoding process for the arithmetically-coded (AC) parts of the bitstream. VP6 uses a 16-bit range coding scheme to code binary symbols.

The AC decoder maintains three state variables: code, mask and high.

Initialization

At initialization, the first two bytes of the AC bitstream are shifted into code. The variable high is set to 0xff00. The variable mask is set to 0xffff.

Decoding a Binary Value

Each binary symbol has an associated probability p in the range 0 to 0xff.

A threshold, t, is computed thus:

t = 0x100 + ( 0xff00 & ( ( (high-0x100) * p ) >> 8 ) )

Equiprobable binary symbols are treated somewhat differently:

t = 0xff00 & ( (high+0x100) >> 1 )

The binary value may then be decoded by comparing code and t. If code is less than t, the binary value is decoded as 0. If code is equal to or greater than t, the binary value is decoded as 1.

If a 1 was decoded, then

high = high - t
code = code - t

If a 0 was decoded, then

high = t

The following renormalization is now repeated while (high & 0x8000) is non-zero.

high = 2 * high
code = 2 * code
mask = 2 * mask
if ((mask & 0xff) == 0x00) {
code = code | next byte from bitstream
mask = mask | 0xff
}

Decoding an Equiprobable n-bit Integer Value

Integer values are coded as a big-endian sequence of equiprobable binary values. To decode an n-bit equiprobable integer value, n equiprobable binary values should be decoded using the sequence above and left-shifted into an integral result variable.

Inverse DCT

Inverse DCT is performed on 8x8 blocks of pixels. The algorithm used is the same (or a small variation) of the one used for the VP3 decoder in FFmpeg [2], the original vp3 iDCT code is here [3].