Indeo Video Interactive (further IVI) is a proprietary video compression algorithm developed by Intel. IVI is a completely different technology compared to the previous Indeo releases were based on vector quantization (see Indeo 2 and Indeo 3). IVI is a block-based interframe compression algorithm similar to MPEG with the exception that it uses block wavelet transforms instead of the common Discrete Cosine Transform. IVI offers a set of "interactive" features which go beyond the traditional services provided by codecs. These include transparency (chroma-keying), local decoding, scalabilty and media protection.
There are currently two main versions of IVI: version 4 (further Indeo4) and version 5 (further Indeo5). Version 5 is very similar to 4, but uses a different more compactly bitstream format. For a description of the IVI version 5 see here: Indeo 5.
Although IVI codec software is currently available for Windows, Macintosh (QuickTime) and Linux (Xanim player), it is not well suited to cross-platform playback due to several incompabilities and speed differencies.
This article focuses on technical details of Indeo4 necessary to build a decoder. IVI is considered an undocumented algorithm. The author of this article was able to find several patents issued by Intel describing different parts of IVI. You can find all them in the references below. Unfortunately the most important parts of the codec like bitstream format or decoding tables were not described in the patents (or it was difficult to find any). The detailed information was obtained through reverse engineering of binary codecs.
Indeo Video Interactive Version 4 (Indeo4)
Brief description of the coding techniques
Indeo4 operates internally in the YUV color space. The color format used is YVU 4:1:0 aka YVU9.
Transform coding is used to convert images from the spatial domain to the frequency domain. Indeo4 decomposes an image into square blocks and performs block wavelet transform in order to obtain frequency coefficients. Further quantization, run-length coding and huffman coding are performed in order to compress these coefficients. Indeo4 uses the block Haar and block Slant transforms as block transforms. Available block sizes are 8x8 and 4x4 pixels. Compared to the DCT, both Haar and Slant transforms can be programmed to use only shifts and adds without multiplies. It makes the coding much faster compared to the DCT-based algorithms (MPEG, H.263). Further these transforms be easily parallelized using a SIMD instruction set.
Indeo4 uses motion estimation in order to perform temporal compression. It supports intra-coded frames (frames without prediction) and inter-coded frames (delta frames). Delta frames can be coded relatively to a previous frame (P frame) or relatively to previous and subsequent frames (bi-directional or B frame).
Brief description of the interactive features
The Indeo4 supports a form of transparency analogous to chroma-keying or blue-screening, allowing foreground video objects to be composited dynamically over a different background - a bitmap or possibly even another video. Encoder analyses each frame and generates a 1-bit transparency bitmask: a pixel is either transparent or not. This bitmask is then encoded as an additional plane into the bitstream using huffman coding.
Sometimes an application (a game, for example) needs to display only a part of the decoded video image. In this case, much of the source image doesn't need to be displayed. Indeo4 provides a capability called local decode that saves processor resources by decoding images partially. The playback application can tell Indeo4 to decode only a rectangular subregion, called the view port, from the source video image. The minimum possible size of the local decode viewport is defined during compression, but the display size and location of the viewport can be changed dynamically during playback. During compression, Indeo4 breaks each frame into small pieces called slices (tiles). Each slice is then encoded into the bitstream as self-containing section that can be easily skipped at decoding time. The decoder decides if a particular slice should be decoded or not.
This feature allows Indeo4 to adapt playback to the processor power of the particular machine being used for playback. This works by dividing the image into a number of frequency bands using wavelet decomposition. These bands represent the image at a different level of sharpness. All bands are necessary to perfectly recreate the original image. But if there is not enough processor power available, the decoder can decompress fewer bands of each frame, rather than simply dropping frames. This produces blurry images, but preserves the motion.
Media protection through access keys
Indeo4 allows video to be compressed with an embedded "password" (access key) which must be supplied by the player software for the video to be usable. If no valid password was specified the decoder should not decode a protected video clip. Nevertheless no encryption of the frame data is performed.
Each Indeo4 video frame is represented by three two-dimensional component planes: one luminance (Y) plane and two chrominance (U and V) planes. Each component plane can be subdivided into several frequency bands using wavelet decomposition. There are two subdivision dispositions:
|Profile||Number of luma bands||Number of chroma bands|
|Normal (Scalability mode is off)||1||1|
|Scalable (Scalability mode is on)||4||1|
Each band is divided into blocks - usually 8x8 pixels for the luminance plane and 4x4 for the chrominance planes. Blocks are grouped into macroblocks; available macroblock sizes are 16x16, 8x8 and 4x4 pixels. The relation between planes, macroblocks and blocks is shown in the table below:
|Plane||Macroblock size||block size||Number of blocks in a MB|
Macroblocks have a set of parameters like MB type (intra or inter), quantization delta, motion vector. These parameters are shared between blocks in a macroblock.
One or more rows of macroblocks are grouped into slices. Slices are coded as independant parts of the bitstream and can be easily skipped during decoding if they are not in the view. See Local decoding feature for a further description. A slice may be as big as an entire component plane or have a size assigned during encoding.
The indeo4 bitstream is organized hierarchically and has the following structure:
Picture header Luma plane data Chroma V plane data Chroma U plane data [Transparency plane data]
Transparency plane is only present in the bitstream if transparency mode is enabled.
Each plane data (except the transparency plane) has the following organization:
Band 0: Band header, Slice1 data, [Slice2 data, ... SliceN data] Band 1: Band header, Slice1 data, [Slice2 data, ... SliceN data] Band N: Band header, Slice1 data, [Slice2 data, ... SliceN data]
Bands with the numbers 1...N are only present if scalability mode is enabled. Otherwise the bitstream contains only single band data. Each band can have one or more slices. Each slice has the following structure:
Slice data size Macroblocks info data Blocks data
"Slice data size" indicates the size of the slice data. "Macroblocks info data" contains information like MB type, quant delta, motion vector for all macroblocks in a particular slice. "Blocks data" contains huffman encoded transform coefficients for all blocks in a slice.
Bitstream format description
The bits of the indeo4 bitstream are in the order LSB to MSB. Bytes are in the sequence "byte 0, 1, 2, ...". Therefore, the first bit of the bitstream is byte 0 bit 0, followed by byte 0 bit 1, up to byte 0 bit 7, and then byte 1 bit 0.
The following functions are used in order to parse the indeo4 bitstream:
readbits(x) - reads x bits from the compressed bitstream skipbits(x) - discard x bits from the compressed bitstream align2byte() - align the bitstream pointer to the byte boundary
The picture header of indeo4 has the following format:
- Picture Start Code (PSC) (18 bits)
PSC is a 18 bit word. Its value is 11 1111 1111 1111 1000b (0x3FFF8). It shall be byte aligned.
- Frame type (3 bits)
Indicates how this frame is coded:
|2||INTER (bi-directional ?)|
- Transparency status (1 bit)
The value of "1" indicates that transparency mode is enabled, otherwise - disabled.
- Marker bit (1 bit)
This bit shall be "0". Some decoder versions generate an error if this bit has value of "1".
- Data size indicator (1 bit)
The value of "1" indicates that the data size field (following this indicator) is present. Otherwise the data size field is not present in the picture header. Data size is considered to be "0" in this case.
- Data size (24 bits)
The size of the bitstream in bytes. Only present in the bitstream if indicated by the "Data size indicator" (see above).
- Key lock status (1 bit)
The value of "1" indicates that the present bitstream is protected with an embedded "password" (access key).
- Key lock (32 bits)
Only present in the bitstream if indicated by the "Key lock status" bit (see above) vs. the access key protection is on.
- Picture size index (3 bits)
This is an index into the table of standard picture sizes:
The value of "7" ("custom picture size") indicates that the size of the picture is explicitly encoded in the picture header using "Picture width ex" and "Picture height ex" fields (see below).
Annex A: Huffman coding
Huffman codes used in Indeo4 are of the form [string of k 1's][some additional bits]. The [string of k 1's] is the code prefix and the additional bits are the code bits. The same form of huffman coding was already used in Indeo 2 codec. Below an example of such a codebook:
0x 10xx 110xxx 1110xxxx 11110xxxxx 111110xxxxxx 111111xxxxxxx*
Codebooks like this one can be completely specified by saying for each k how many "additional bits x" there are. Thus the codebook above can be defined using the following short descriptor:
numRows = 7 xbits[numRows] = 1, 2, 3, 4, 5, 6, 7*
The asterisk denotes that the "0" at the end of the prefix in the last row is replaced with an "x" bit.
All Indeo4 codebooks are specified using short descriptors described above. Due to the high compactly nature of those, it's possibly to change codebooks several times per frame (for example, each band can have its own codebook representing signals more compactly as the predefined one).
Annex B: Run-length coding
Run-length coding in Indeo4 is performed using a predefined set of the run-value tables. Each table consists of (skip,value) pairs, where skip is the number of zeros and value is the next non-zero component. The run-value tables are only used for AC coefficients. The DC coefficient (the first coefficient in a transform matrix) is coded using the differential coding.