- Extension: cup
- Company: Humongous Entertainment
- Samples: http://samples.mplayerhq.hu/game-formats/cup/
Humongous CUP files are used as demo movies for games from Humongous Entertainment. CUP files have the file signature 'BEAN' and are played with an executable called coffee.exe. They appear to contain non-interleaved audio and video data; all of the audio data is stored in the file first and the video data second.
CUP file use both little and big endian numbers. Big endian numbers are used when encoding the chunk size in the chunk preamble. All other multi-byte numbers appear to be stored in little endian format.
bytes 0-3 chunk type FourCC bytes 4-7 chunk size (including this 8-byte preamble) bytes 8.. chunk payload
The top-level chunk in a CUP file is the BEAN chunk which encapsulates the entire file and can also serve as a file signature:
bytes 0-3 'BEAN' FourCC bytes 4-7 size of entire CUP file (including this preamble) bytes 8.. CUP file
Following the BEAN signature is a HEAD chunk with the following format:
bytes 0-3 'HEAD' FourCC bytes 4-7 size = 0x0E = 14 bytes bytes 8-9 unknown, always seems to be 0x0042 (66) bytes 10-11 video width bytes 12-13 video height
An RGBS chunk often appears after the HEAD chunk in a CUP file. It has the following layout:
bytes 0-3 'RGBS' FourCC bytes 4-7 chunk size = 0x0308 = 776 bytes bytes 8..775 palette entries
The palette entries are 256 3-byte triplets of red-green-blue palette components. Each component is 8 bits (as opposed to 6 bits which is often seen in palettized formats).
The RGBS chunk is generally followed by the SFXB chunk which contains audio data. This is the typical hierarchical organization of the SFXB chunk and its constituent chunks:
The SFXB chunk contains its preamble and the WRAP chunk. The WRAP chunk contains its preamble, an OFFS chunk and a series of DATA chunks. The OFFS chunk has the following format:
bytes 0-3 'OFFS' FourCC bytes 4-7 chunk size bytes 8.. DATA chunk offsets
The DATA chunk offsets are 4-byte numbers stored in little endian format that fill the remainder of the OFFS chunk after the preamble. They indicate the offsets (and, implicitly, the count) of audio DATA chunks. The offsets are relative to the start of the OFFS chunk. It is instructive to note that since the first DATA chunk immediately follows the OFFS chunk, its offset will be the same as the size of the OFFS chunk, though stored in the opposite byte order. For example, if there were only one audio DATA chunk in the file, and the OFFS chunk began at 0x32E:
0x32E 4F 46 46 53 00 00 00 0C 0C 00 00 00 44 41 54 41 OFFS........DATA 0x33E ....
The audio DATA chunks usually contain uncompressed PCM in 8-bit, unsigned format. But they sometimes contain the following hierarchical organizations:
In this case, the DATA chunk contains its preamble and the TALK chunk. The TALK chunk contains its preamble followed by the HSHD and SDAT chunks. The HSHD chunk has the following layout:
bytes 0-3 'HSHD' FourCC bytes 4-7 chunk size = 0x18 = 24 bytes bytes 8-13 unknown bytes 14-15 sample rate bytes 16-23 unknown
The SDAT chunk contains uncompressed, unsigned, 8-bit PCM data.
After the SFXB is another chunk marked DATA. DATA has many meanings in this formats. This data chunk encapsulates a number of BLOK chunks. This is the hierarchical organization of BLOCK chunk:
The RGBS chunk, already described, indicates that the palette can change during playback. The RATE chunk has the following layout:
bytes 0-3 'RATE' bytes 4-7 chunk size = 0xA = 10 bytes bytes 8-9 unknown
It is possible that this defines a change in the playback rate.
The SNDE chunk has the following format:
bytes 0-3 'SNDE' bytes 4-7 chunk size = 0x12 = 18 bytes bytes 8-17 unknown
While the purpose of this block is unknown, some of the numbers may reference back into the AUDIO data chunks to specify which piece of audio should be playing at the current time.
The TOIL chunk has the following format:
bytes 0-3 'TOIL' bytes 4-7 chunk size = 0x10 = 16 bytes bytes 8-15 unknown
The SRLE and LZSS chunk types indicate video compression types and will be explained in their own sections.
SRLE is the name of one of the video compression algorithms seen in CUP files. It is suspected to be a simple run length encoding scheme.
LZSS (Tri-LZ) Compression
LZSS indicates one of the video compression algorithms seen in CUP files. It is a variant of the common LZ algorithm. An LZSS chunk has the following hierarchical organization:
Thus, the LZSS chunk contains its preamble followed by an LZHD chunk and (another type of!) DATA chunk. The LZHD chunk has the following layout:
bytes 0-3 'LZHD' FourCC bytes 4-7 size = 0x10 = 16 bytes bytes 8-11 compression type bytes 12-15 size of decompressed data
The only valid compression type is 0x2000 which indicates the tri-lz method. The DATA chunk contains the compressed data.
A block of tri-lz compressed data is stored in 3 parts. In a compressed data block, part 1 starts at byte 8. Part 2 starts at the offset formed from bytes 0-3 of the compressed buffer. Part 3 starts at the offset formed from bytes 4-7 of the compressed buffer.
(TODO: finish description)