This page is based on the document 'Description of the Planar RGB (8BPS) Codec' by Roberto Togni found at http://multimedia.cx/8bps.txt.
- FOURCCs: 8BPS
- Name: Planar RGB (Photoshop)
- Frame type: intra only
The Planar RGB codec is used to compress frames in Apple QuickTime files. It is a simple codec that stores frames in RGB format (24 bit or paletted), in planar format (first all red samples, then the green ones and finally the blue), using an RLE algorithm. Each chunk of data encodes a single frame.
The format allows encoding of lines shorter than image width and can do a partial update of the frame. Please note that none of my samples use this trick, and all frames in the file are key frames. I don't know if the original QT decoder would accept short lines; the codec was probably designed to be intra only.
All multi-byte values are stored in big-endian format.
Frames are rendered from left to right, top to bottom. The number of planes in the image depends on the colorspace:
- RGB8 has one plane containing palette indices
- RGB24 has 3 planes
- RGB32 has 4 (the 4th plane is probalby alpha channel)
If the image format is RGB8, the palette is stored in the ImageDescription atom in the encapsulating QuickTime video trak's stsd atom.
Every compressed frame can be split in two sections: The line lengths and the pixel data. All line lengths are grouped at the beginning of the compressed frame, one set for each plane. The compressed pixel data follows them.
The first set is for red plane (or palette indexes if format is RGB8). If colorspace is RGB24 or RGB32, there is a second set used for green pixels, and a third set for blue pixels. For RGB32 data, there is a fourth set used for the 4th plane of data (probably an alpha channel).
Each line length is a 2-byte value that represents the size of the compressed data for that line. The values are stored from top to bottom, starting with top line. The size of each line length set is 2*image_height bytes. Sets are stored in the same order as planes.
So, line lengths for blue plane for RGB32 format starts after 2*(2*image_height) bytes from the beginning of the compressed frame. The compressed pixel data, stored after line lengths, starts at offset 4*(2*image_height) into the compressed frame.
To decompress each line, follow this simple algorithm:
repeat until all compressed data for this line is decoded get a byte, and call it counter if counter is <= 127 copy counter bytes from compressed data to output plane else get a byte, and call it value store value into output plane for (257 - counter) times
Follow this algorithm:
build compressed data pointer for each plane build line length set pointer for each line get compressed line length decompress line
Then, if needed, the decoder can reassemble the planes to build a standard packed-data RGB frame.
I never encountered a file coded in RGB32 colorspace, so this data format is not verified. The format allows you to encode lines shorter than image width. In that case, the decoder should keep values from previous frame for non-coded pixel. Please note that I didn't check if short lines really exist in encoded files.